Time for Some New Acronyms for CRAN

Time for Some New Acronyms for CRAN

By Charlie Ashton

C.AshtonLunchtime “debating tables” — I’m sure you’ve seen them at conferences. At a recent event, I was drawn to a table where the conversation was unusually animated. The subject was “CRAN” and I was intrigued to find out why this topic was generating so much disagreement. Out of the eight or nine people at the table, there were at least four or five different interpretations of exactly what the term CRAN means.

The industry is clearly deploying this technology in multiple phases, however, given all the various definitions of CRAN, where exactly are we as an industry? Also, what are some of the major challenges that need to be addressed, both technical and commercial, before service providers worldwide can reap the full benefits of this aspect of network virtualization?

From a business perspective, all the approaches to CRAN are intended to reduce capex and opex for service providers. By centralizing and then virtualizing processing functions that were traditionally performed by dedicated networking equipment located at the antenna sites (cell sites), CRAN enables the cell site to be simplified to where it’s just the radio unit comprising power amplifiers, filters and the antenna. The cost of the baseband and call processing functions drops dramatically thanks to COTS hardware and virtualization. Simultaneously, the risk of network downtime is reduced and the overall experience for subscribers is improved.

CRAN acronyms post

If we consider the installed base of CRAN equipment, it’s clear that this technology already represents a significant share of overall telecom spending. A recent report by Infonetics estimates that revenue from CRAN architecture equipment was $4.9B in 2014, up from $4.1B the previous year, while projecting that it will reach $10B by 2018. So far, the majority of deployments are in Asia (primarily Japan and South Korea), with Infonetics expecting rollouts to start in Europe, Latin America and North America this year. The business benefits are compelling: SNS Research reports that China Mobile has shown a 30% reduction in CAPEX and a 53% reduction in OPEX in its CRAN trials.

The flavor of CRAN most widely deployed today is the traditional Centralized RAN architecture. In this approach, the basestation (BTS) is decomposed by decoupling its remote radio head (RRH) at the cell site from its baseband unit (BBU). Multiple RRHs are connected to a single, shared BBU over dark fiber, via a “fronthaul” interface that is either Common Protocol Radio Interface (CPRI) or Open Basestation Architecture Initiative (OBSAI). On average there are three RRHs (typically installed on rooftops) per BBU (usually in the basement of a building) for a macro cell site, as well as a few RRH micro and pico sites connected to the BBU. Separating the RRHs from the BBUs reduces the cost (both CAPEX and OPEX) of the equipment at the cell site. Depending on the level of aggregation, it brings some economies of scale to the BBU, the cost of which is also reduced whenever it’s located indoors.

In the next phase of consolidation, several such BBUs are grouped together and aggregated to form a Centralized BBU (C-BBU) using a CPRI/OBSAI switch, cross connects and load balancers. As one example, this architecture has been deployed by KT in South Korea. Within the C-BBU, processing resources are pooled and allocated based on RRH traffic. Often, a C-BBU will support both residential and business areas, with resource allocation adjusted dynamically as traffic patterns change during the day. This solution is limited to small clusters of RRHs because complexity increases exponentially with larger clusters of RRHs. It yields significant some cost savings compared to the basic centralized RAN approach where BBUs in both residential and business areas must be sized for peak traffic in their respective locations. Note, in both these approaches, the BBU hardware is still custom because these approaches can’t leverage the cost advantage of COTS hardware.

The next step is a true Cloud RAN architecture in which the centralized BBUs supporting large clusters of cell sites are virtualized. These “vBBUs” can be instantiated on standard COTS server platforms rather than on dedicated custom, fixed-function equipment from traditional RAN vendors. Several telecom RAN infrastructure vendors are working on vBBU solutions. Depending on the approach, the fronthaul transport provisioning may require very high bandwidth and ultra-low latency, or nominal bandwidth and low latency or nominal bandwidth and relaxed latency. Also, computational efficiency is a major concern in some of the approaches. Various PoCs are either in progress or completed.

The challenge of computational efficiency was addressed in an ETSI Proof-of-Concept involving Alcatel-Lucent, China Mobile, Intel and Wind River, which was completed last year and subsequently demonstrated at various industry events (details here). This showed that it’s possible to meet the stringent real-time requirements of both TD-LTE and GSM systems using virtualized infrastructure. It also illustrated that it’s possible for cloud RAN to maintain the level of reliability required for telecom infrastructure, which was demonstrated by performing functions such as the live migration of LTE streams without service interruption.in a viirements of both not onl stringent real-time requirements ofequipment. and business areas must be sized for peak traffic

There are several approaches to the challenge of fronthaul efficiency. Some service providers are exploring compression to reduce the CPRI/OBSAI bandwidth required for each RRH, while others are investigating the use of WDM, with multiple carriers on the same fiber. These options, though, still require a dedicated fiber connection between each RRH and the vBBU, which is not always available or practical in many locations.

Altiostar is one company with an innovative approach to the fronthaul connection. They have developed technology that allows the use of Ethernet for fronthaul, enabling very high density NFV CRAN to be deployed anywhere that a standard Ethernet connection can be provided to the RRH. Altiostar’s portfolio contains macro, micro and pico eNodeBs based on its innovative NFV CRAN architecture. In partnership with Wind River, Altiostar showcased their virtualized intelligent base station at Mobile World Congress 2015. The solution leverages the low cost and scale of COTS hardware ecosystem to achieve 90% cost savings over Centralized RAN approaches based on custom hardware. Their CRAN solution is commercially deployed in a dense urban area in North America, with other deployments and trials in progress in Europe.

The next major step in operational efficiency will come from the integration of virtualized Cloud RAN “vRAN” into the system-wide Network Functions Virtualization (NFV) architecture standardized by leading service providers through the ETSI initiative. vRAN resources can be dynamically optimized, scaled and orchestrated as part of the overall NFV cloud. This brings service providers the benefits of service agility and OPEX reductions, along with the resilient infrastructure that is expected from telecom networks. This evolution of the network aligns with the industry’s vision for 5G.

Companies like ASOCS, with a complete virtualized basestation “vBS”, are launching solutions that target specific vRAN use cases such as large venues (e.g. stadiums, skyscrapers and malls) and high-density urban areas with wide variations in traffic patterns and subscriber density. These solutions enable service providers to deploy distributed NFV clouds for the vBS and other Mobile Edge Computing “MEC” applications at the metro and network edge

So it’s no surprise that the discussion at my lunch table was so animated. Essentially we were having parallel discussions about Centralized RAN, Centralized BBU, Cloud RAN and virtualized Cloud RAN, all under the umbrella topic of “CRAN”. And if we hadn’t spent so much time clarifying what everyone was actually referring to, the conversation might well have progressed to Coordinated RAN, Collaborative RAN, Clean RAN and Advanced CRAN, all of which are additional vendor-specific approaches that could possibly be subjects for another article.

It’s clear that all these variants of the CRAN concept have the potential to deliver major CAPEX and OPEX savings in the network, while ensuring that end users experience the seamless coverage and high bandwidth that they expect. Each of these approaches can help to reduce customer churn and keep network costs under control, while NFV promises the agility that will enable the delivery of new, value-added services to drive revenue growth for service providers.

What are your thoughts on this? Which of these CRAN approaches do you expect to be most effective and when do you expect to see them deployed?

Abbreviated version of blog post also available at Light Reading.

Tweet about this on TwitterShare on Google+Share on FacebookShare on LinkedInEmail this to someone